9 display of measured value – VEGA VVO VEGA Visual Operating User Manual
Page 56
56
VEGA Visual Operating
General VVO-functions
12.9
Display of measured value
The current measured values of the meas-
urement loops can be displayed from the
main menu (this function is possible in all
three user levels, i.e. "Planning“, "Mainte-
nance“ and "Operator“). Click to
Display
and point to
Display of measured value.
In the window "Selection of measurement
loop - Indicate measured value“ you see
dependent on the configuration several
measurement loops (if VVO is directly
connected to a 4 ... 20 mA-sensor via
VEGACONNECT 2, you see only one
measurement loop). Click to the measure-
ment loop, the values of which you want to
display and click to
OK.
Now you see in the window "Display of
measured value“ all outputs you have
created. With
Quit you return to the
VVO-main menu.