VEGA VVO VEGA Visual Operating - Manual (Page 26)

26 VEGA Visual Operating
Set-up of a signal conditioning instrument VEGAMET 614
9.2 Create new measurement loop
A new measurement loop should be
created when you want another con-
figuration for VEGAMET than the factory
setting (level measurement with hydro-
static pressure transmitter).
Click to
Configuration, point to Meas-
urement loop and click to New.
Choose the application, then the
sensor type (the graphics will
change appropriately). Click to
Continue >>.
On signal conditioning instruments
with correction input further options
can be adjusted such as e.g. real
value correction. Click to
Con-
tinue >> and confirm the warning.