VEGA VVO VEGA Visual Operating User Manual
Page 33
Advertising
VEGA Visual Operating
33
Set-up of a signal conditioning instrument VEGAMET 614
With
integration time in the window "Condi-
tioning“ you reach the window "Integration
time“. Here you enter an integration time in
seconds. Confirm the adjustment as usual
with
OK, then you are again in the window
"Conditioning“, Click to
Quit and you are in
the window "Instrument data parameter ad-
justment“.
Enter the dielectric constant of the product
(preadjusted is the value 81.00 for water).
Mark here if negative measured values
should be suppressed and if a fault signal
(red LED on VEGAMET) should be triggered
at a measured value of less than -10 % or
more than 110 %.
Advertising