VEGA VVO VEGA Visual Operating User Manual
Page 37
VEGA Visual Operating
37
Establishing of a linked measurement loop with VEGAMET 515V
10
Establish a linked measurement loop with VEGAMET 515V
The connection of the signal condi-
tioning instrument VEGAMET 515V is
made as the connection of VEGAMET
614.
With VEGAMET 515V three different
linked measurements are possible:
• level measurement in pressurized
vessel
• level measurement with variable
density
• level/gauge difference measurement
Only the establishing of VEGAMET
515V as level difference measurement
is described here, the procedures for
other linked measurements are similar.
Click to C
onfiguration, then to Measuring
system.
Click to
Sensor survey (Additional
functions and Reset as described with
VEGAMET 614).
Click in the window to
Search sensor. Then all
sensors connected to VEGAMET should be
displayed. The displayed data of the sensors
are now saved in VEGAMET. When clicking
to
Configuration, you can delete data of sen-
sors, modify them or enter them manually.
Click to
Quit to reach the window "Configura-
tion measuring system“, click again to
Quit,
to reach the VVO-menu window.