SENA Parani-BCD110V3 - Manual (Page 13)

Sena Technologies, Inc 13
2.4. Connecting the Hardware
This section describes how to connect the Parani-BCD110V3 to the Development Board and the
Development Board to the serial device for initial testing.
 Connect the Parani-BCD110V3 to the Development Board.
 Connect a power source to the Development Board for the Parani-BCD110V3.
 Connect the Development Board for the Parani-BCD110V3 to a serial device.
2.4.1. Connecting Parani-BCD110V3 to Development Board
Connect the Parani-BCD110V3 to the Development Board as shown below.
Figure 2-2 Connecting Parani-BCD110V3 to Development Board