SENA Parani-BCD110V3 - Manual (Page 14)

Sena Technologies, Inc 14
2.4.2. Connecting Power to Development Board
Connect the power plug to the power connector of the Development Board for the Parani-
BCD110V3 using the DC power adapter or USB power cable that is included in the package.
Figure 2-3 Connecting Power to Development Board
2.4.3. Connecting a Device to Development Board
Connect the Serial Data cable between the Development Board and the serial device. If necessary,
supply power to the serial device attached to the development Board.
Figure 2-4 Connecting a Device to Development Board