B.3. command description – SENA Parani-BCD110V3 User Manual
Page 52
Sena Technologies, Inc
52
I/O
28
29
30
31
32
33
34
35
36
AT+IOINFO?
AT+SETIO=
AT+DIO=
AT+DIO?
AT+AIO?
AT+IOPS=
AT+DIOCDS=
AT+AIOCDS=
AT+IOSYNC=
Security
37
38
39
40
41
AT+BTKEY=$string
AT+BTSD?
AT+BTCSD
AT+BTFP,n
AT+BTSEC,a,e
Miscellaneous
42
43
AT+BTNAME=$string
AT+BTLPM,n
S-REGISTER
44
45
46
AT&V
ATSnn?
ATSnn=mm
REMOTE CONFIGURATION
47
48
49
AT+PASS="nnnnnnnn"
AT+CHPASS="nnnnnnnn"
AT+REDISCONNECT
B.3. Command Description
B.3.1. ATZ
Response
OK
Purpose
Software Reset
Description
This has the same effects as Powercycling the unit.
This command disconnects any connected Bluetooth device, and stops ongoing tasks.
After rebooting, the status will be decided by the preset operation mode.
Some AT commands require the ATZ command be run so that the commands can take
effect.
B.3.2. AT&F
Response
OK
Purpose
Hardware reset
Description
This has the same effect as initialization by pressing the factory reset button.
All parameters are initialized to factory defaults