SENA Parani-BCD110V3 - Manual (Page 46)

Sena Technologies, Inc 46
1. Reset Mode0
2. Drop pairing signal Mode3
3. Inquiry and connect to BCD1
4. Connected Slave 4. Connected Master
Using pairing signal, users can make pairing connections between a Parani-Parani-BCD110V3
unit and multiple Bluetooth devices in Multi-Drop Mode. Up to 7 connections can be established.
In this example, we will name a Parani-BCD110V3 master as Master and 7 Parani-BCD110V3s as
Slave1, Slave2, Slave3, Slave4, Slave5, Slave6, Slave7.
Step 1. Turn on Master, Slave1, Slave2, Slave3, Slave4, Slave5, Slave6, Slave7 and do factory
default by using RST signal.
Step 2. Set the pairing signal of Slave1, Slave2, Slave3, Slave4, Slave5, Slave6, Slave7 to low
state and hold the signal for 2 seconds to make them in Mode3.
Step 3. Turn them off.
Step 4. Set the pairing signal of Master to low state and hold the signal for 2 seconds.
Step 5. . Turn Slave1 on.
Step 6. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave1, then Master is in Mode1 and Slave1 in Mode2. The BD address
of Slave1 is stored at S46 of Master.
Step 7. Turn Slave2 on.
Step 8. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave2, then Master is in Mode1 / Multi-Drop Mode and Slave2 in
Mode2. The BD address of Slave2 is stored at S54 of Master.
Step 9. Turn Slave3 on.
Step 10. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave3, then Master is in Mode1 / Multi-Drop Mode and Slave3 in
Mode2. The BD address of Slave3 is stored at S55 of Master.
Step 11. Turn Slave4 on.
Step 12. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave4, then Master is in Mode1 / Multi-Drop Mode and Slave4 in
Mode2. The BD address of Slave4 is stored at S56 of Master.
Step 13. Turn Slave5 on.
Step 14. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave5, then Master is in Mode1 / Multi-Drop Mode and Slave5 in
Mode2. The BD address of Slave5 is stored at S57 of Master.
Step 15. Turn Slave6 on.
Step 16. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave6, then Master is in Mode1 / Multi-Drop Mode and Slave6 in
Mode2. The BD address of Slave6 is stored at S58 of Master.
Step 17. Turn Slave7 on.
Step 18. Set the pairing signal of Master to low state and hold the signal for 2 seconds. Master
discovers and connect to Slave7, then Master is in Mode1 / Multi-Drop Mode and Slave7 in
Mode2. The BD address of Slave6 is stored at S59 of Master. Once master connects to 7 slaves,
setting the pairing signal of master to low state is ignored and does not do anything.
Step 19. When any slave turns off and on, Master in Multi-Drop Mode automatically reconnects
to it.