SENA Parani-BCD110V3 - Manual (Page 22)

Sena Technologies, Inc 22
If one requests the encryption, the other consents to it. The Encryption options works well in case
that only one of the devices between Master and Slave use the Encryption option.
Parani-BCD110V3 has 4 response messages, ‘OK’, ‘ERROR’, ‘CONNECT’, and ‘DISCONNECT’.
In some cases, these responses can affect the host system unexpectedly. To prevent this, user
can set the Command response to ON or OFF.
Click [Apply] button to apply any changes made to Parani-BCD110V3.
Connection (out) icon will show the following window to search and connect other Bluetooth
devices.
Figure 3-6 Connection (out) Window
Click [Search] button to search nearby Bluetooth devices. Once several Bluetooth devices has
been found, select one of the devices and click the [Connect] button. The selected Bluetooth
device must be discoverable and connectable. Click [Disconnect] button to cancel the
connection.
After the connection has been established, you will be able to test signal strength by pushing the
[START] button.