SENA Parani-BCD110V3 - Manual (Page 21)

Sena Technologies, Inc 21
ParaniWIN in the menu bar at upper left corner of the window without re-running the ParaniWIN
program.
Figure 3-4 Menu Bar at Upper Left corner of ParaniWIN
When the ParaniWin software is able to access the Parani-BCD110V3 properly, Clicking icons
such as Device Setting, Connection(out), Connection(in), Connection Wizard icons opens
corresponding window. Clicking the Device Setting icon opens the Device Setting Window where
hardware reset can be executed or operation mode and RS232 can be configured as well. The
Security option also can be configured in this window.
Figure 3-5 Device Setting Window
Parani-BCD110V3 supports two security options, Authentication and Encryption. If you enable the
Authentication option, you must also enter a Pin Code value. If the authentication is enabled, the
connection, between the Master and Slave device must share the same Pin Code. In case that
Parani-BCD110V3 connects to another Bluetooth device, that requires authentication, you must
know its Pin Code. In general, most Bluetooth devices have a pin code of 1234 or 0000. The Pin
Code of Parani-BCD110V3 is 1234 at default.
If you check Encryption option, the Parani-BCD110V3 will encrypt packets and sent to the device.