SENA Parani-BCD110V3 - Manual (Page 9)

Sena Technologies, Inc 9
1.2. Product Specification
Parani-BCD110V3
Bluetooth specifications Bluetooth v2.0 + EDR
Class1
Profile: SPP( Serial Port Profile ), Sena I/O Profile
Working distance:
By default antenna is 200m (0.12 mile),
Supports up to 1000m (0.62 mile)
Transmit Power
+18dBm Typical
Receive Sensitivity
-90dBm (0.1% BER)
Frequency range
2402 MHz – 2480 MHz
Serial Interface
Serial UART speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer
I/O Interface
5 DIO, 2 AI
PIN Interface
BCD110Sx: 1.27mm SMD Pad 18 x 2 (36pin)
BCD110Dx: 1.27mm Pin Header 18 x 2 (36pin)
USB Interface V2.0
Configuration ParaniWIN, Modem AT command set
Firmware Update ParaniUpdate
Power Nominal: [email protected]
Maximum: [email protected] ([email protected] in Test Mode
Environmental Operating temperature : -40 ~ 80 o C
Storage temperature: -40 ~ 85 o C
Humidity: 90% (Non-condensing)
Physical Properties Parani-BCD110V3 Dimension
DIP type
34.6 x 16.8 x 7.5 mm (0.661 in x 1.362 in x 0.295 in)
SMD type
34.6 x 14.8 x 3.0 mm (1.362 in x 0.583 in x 0.118 in)