SENA Parani-BCD110V3 - Manual (Page 61)

Sena Technologies, Inc 61
B.3.28. AT+IOINFO?
Response  IOSETTING : 0000000
IOPS : 0

DIOCDS : 0 
AIOCDS : 0,15000,0,15000,0 
IOSYNC : 00000 
 OK
Purpose Display Bluetooth I/O settings
Description The current Bluetooth I/O settings are displayed including I/O configuration, Periodic
sampling, DIO change detection sampling, AIO change detection sampling and DIO
synchronization configuration.
IOSETTING=0/1/2/3/4 (I/O configuration value)
IOPS=0~3600 (sec)
DIOCDS=0/1 (Disabled/Enabled)
AIOCDS= (AIO change detection sampling *Refer to B.3.35. AT+AIOCDS)
IOSYNC=0/1/2/3 (DIO synchronization configuration)
B.3.29. AT+SETIO=0000000
Response  OK
Purpose Set I/O Configuration for AIO and DIO
Parameters AIO Configuration (Default 0)
0 Disabled
1 Enabled
DIO Configuration (Default 0)
0 Disabled
1 Digital input, default PULLDOWN
2 Digital Input, default PULLUP
3 Digital output, default LOW
4 Digital output, default HIGH
Description The function of AIO and DIO is determined. The changes are applied after software
reset.
Example AT+SETIO=0101234
B.3.30. AT+DIO=
Response  OK
Purpose Set output values of DIO pins
Parameters 0/1
0 Low
1 High
Description The output values of DIO pins are set. Changing output value is applied to the DIO pin
whose I/O configuration is Digital output.