At commands, At+multi,n, At+mlist – SENA Parani-BCD110V3 User Manual
Page 29: Athx, athbdaddr
Sena Technologies, Inc
29
Example of multiple connection mode.
4.3. AT Commands
Here are AT commands used in multiple connection mode as below.
4.3.1. AT+MULTI,n
Select a multiple connection mode. Refer to Table 4-1 for descriptions.
4.3.2. AT+MLIST?
It shows the current mode, the connection status and the BD addresses of slaves.
Example of AT+MLIST? Command
4.3.3. ATHx, ATHbdaddr
Using the ATH command, connections with all slaves or only connections with specific slaves can
at+mlist?
CURRENT MODE: MULTI DROP
TASK1 – 000195000001
TASK2 – 000195000002
TASK3 – DISCONNECT
TASK4 – 000195000004
TASK5 – DISCONNECT
TASK6 – DISCONNECT
TASK7 – DISCONNECT
OK
TASK1 OK – AUTO CONNECT
TASK2 OK
TASK3 OK – AUTO CONNECT
TASK4 OK
TASK5 OK
TASK6 OK
TASK7 OK