SENA Parani-BCD110V3 - Manual (Page 26)

Sena Technologies, Inc 26
This manual will explain the method using HyperTerminal. If you need to install HyperTerminal,
click start>setting>control panel>add/remove programs. For more precise details on
HyperTerminal installations, please refer to Microsoft Windows Help section.
Attach Parani-BCD110V3 to serial port of host computer and power on the unit.
Launch HyperTerminal. It can be found in start menu >programs >accessories >communication
>HyperTerminal. Select the Serial port that Parani-BCD110V3 is connected to.
Input the same settings into Serial port configuration window as Parani-BCD110V3 settings.
Select the Serial port setting displayed in the Window, please make sure the serial settings in
HyperTerminal are set to the same settings as the Parani-BCD110V3’s serial settings.
Figure 3-11 HyperTerminal
To view the AT commands that are being typed, you will need to enable the local echo option.
Go to File->Properties->Settings->ASCII setup and select the “Echo typed characters locally”
option.
For expanded AT commands, please refer to Appendix A. AT commands.
Example of AT commands
at
OK
at+btinfo?
000195000144,BCD110v3.0.0-000144,MODE0,STANDBY,0,0,NoFC
OK
at+btinq?
000B5320070E,Promi-MSP_20070E,020300
0009DD500027,LEECOM,1E010C
OK
atd000b5320070e
OK
CONNECT 000B5320070E