GE Industrial Solutions ASTAT-CD Plus - Manual

GE Industrial Systems
SOLID-STATE SOFT STARTER
ASTAT ® -CD Plus
USER MANUAL
REMARKS:
1. Read this manual thoroughly before using the ASTAT-CD Plus and store in a safe place
for reference.
2. Make sure that this manual is delivered to the end user.
3. CE Marking
When using ASTAT-CD Plus in the EU, compliance with EMC is required.
All ASTAT-CD Plus sizes comply with the generic EN 50081-2 and EN 50082-2
4. The policy of GE Industrial Systems is one of continuous improvement.
The right is reserved to alter the design on any structural details of the products at any
time without giving notice.
DEH-40397B