GE Industrial Solutions LP33 Series 80 & 100 Installation Guide User Manual
Page 20
Modifications reserved
Page 20/47
OPM_LPS_3UI_80K_M10_1US_V010.doc
Installation Guide LP33 Series 80 & 100 UL S1
White color
=
without any anomaly
Red color
=
anomaly evidence
Fig. 3.6-2 ShockWatch device
The package of the LP33 Series 80 &
100 is equipped with ShockWatch
(indicator for shock), and TiltWatch
(indicator for overthrow) on the
outside.
These devices indicate an eventual
shock or overthrow during
transport.
Whenever these devices show a
possible anomaly, the UPS shall not
be commissioned before consulting
a “Service Center”.
Fig. 3.6-3 TiltWatch device
NOTE !
A damaged UPS must never be installed or connected to utility or battery!
In case of any damage sustained during the transport, immediately inform the
shipping agent!
A detailed report of the damage is necessary for any indemnity claim.
Packing material recycling
GE, in compliance with environment protection, use only environmentally
friendly material.
UPS packing materials must be recycled in compliance with all applicable
regulations.