Safety rules, Place of installation, Internal batt – GE Industrial Solutions LP33 Series 80 & 100 Installation Guide User Manual
Page 6: Epo (emergency p, 1 safety rules, The only condition
OPM_LPS_3UI_80K_M10_1US_V010.doc
Installation Guide LP33 Series 80 & 100 UL S1
1 SAFETY RULES
With this document, GE gives to the user all the necessary information about the correct use of the UPS.
Please read carefully this Installation Guide before installing or operating the UPS.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual, please contact the
nearest Service Center before you proceed.
All UPS installation, maintenance and service work should be performed by qualified service personnel
only.
The KNOWLEDGE and the FULLY compliance of the safety instructions and
the warning contained in this manual are
THE ONLY CONDITION
to avoid any dangerous situations during installation, operation,
maintenance work, and to preserve the maximum reliability of the UPS
system.
NOTE !
LP33 Series 80 & 100 is a FCC Class A-UPS Product.
While every care has been taken to ensure the completeness
and accuracy of this manual, GE assumes no responsibility or
liability for any losses or damages resulting from the use of the
information contained in this document.
GE
Refuses any responsibility in case of non-observance,
unauthorized alterations or improper use of the
delivered UPS.