GE Industrial Solutions H2007001 G11 Series - Manual (Page 26)

Infinity D Power System Installation Guide: +24V Systems H2007001
Issue 2.0, June 4, 2009 26
Mount the Subframe System to the Frame or Cabinet
The Infinity D is provided in integrated Subframes. Each Subframe contains one Battery
Connection Module, one Pulsar Controller and one or more Rectifier System
Modules. Converter System Modules are not required to have a valid system and are
typically on the bottom of the power equipment stack in any given Subframe. Step 1
below shows the elements included in the smallest valid Subframe.
Step Action
1.
Mount the Subframe to the rack.
2.
Use the fasteners and torque values provided by the frame supplier to secure flanges on the right
and left hand frame rails. Use at least 2 rack screws per side for each element in the Subframe.
This Subframe requires at least 8 rack screws.