6 what to do if, 1 general information, What to do if – Xylem HandyLab 680 User Manual
Page 103: General information, Rror according to chapter 6 w, Chapter 6 w, 6what to do if
HandyLab 680
What to do if...
103
ba77041e01
03/2014
6
What to do if...
6.1
General information
Sensor symbol flashes
Display
Meter does not react to
keystroke
You want to know which
software version is in
the meter or IDS sensor
Cause
Remedy
– Calibration interval expired
– Recalibrate the measuring
system
Cause
Remedy
– Batteries almost empty
– Charge the batteries (see
)
– Replace the batteries (see
)
Cause
Remedy
– Operating condition undefined
or EMC load unallowed
– Processor reset:
Press the <ENTER> and
<On/Off> key simultane-
ously
Cause
Remedy
– E. g., a question by the service
department
– Switch on the meter.
– Open the menu,
<ENTER
_
> / Storage &
config / System / Service
information. The instrument
data are displayed.
or
– Connect the sensor.
Press softkey [Info]/[More].
The sensor data are dis-
played (see section 4.5)