Xylem HandyLab 680 - Manual (Page 91)

HandyLab 680 Operation
91 ba77041e01 03/2014
4.11.3 Editing the measurement data storage
The contents of the manual or automatic measurement data storage
can be shown on the display.
Each of the measurement data storages has a function to erase the
entire contents.
Editing the data storage The storage is edited in the menu, Storage & config / Data storage. To
open the Storage & config menu, press the <MENU/ENTER
_
> key in
the measured value display.
Open the manual or automatic storage directly with the <RCL> or
<RCL
_
> key.
Note
The settings are explained here using the manual storage as an exam-
ple. The same settings and functions are available for the automatic
storage.
Settings Menu item Setting/
function Description
Data storage /
Manual data storage /
Display - Displays all measurement
datasets page by page.
Further options:
 Scroll through the datas-
ets with <
><>.
 Output the displayed
dataset to the interface
with <PRT>.
 Quit the display with
<ESC>.
Data storage /
Manual data storage /
Output to USB flash
drive or printer - Outputs all stored measure-
ment data to a connected
USB flash drive/USB printer
Data storage /
Manual data storage /
Output to RS232/USB - Outputs all stored measure-
ment data to the interface
Data storage /
Manual data storage /
Erase - Erases the entire manual
measurement data storage.
Note:
All calibration data remains
stored when this action is
performed.