Xylem HandyLab 680 - Manual (Page 75)

HandyLab 680 Operation
75 ba77041e01 03/2014
4 Start the measurement with <MENU/ENTER>.
The measured value is checked for stability (stability control).
The [AR] status indicator is displayed. The measured parame-
ter flashes.
5 Wait for the AutoRead measurement to be completed
([HOLD][AR]) display or
accept the calibration value with <MENU/ENTER>.
The calibration record is displayed and output to the interface.
6 Switch to the measured value display with <MENU/ENTER>.
15.03.2014 08:00