Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 11)

WQL-Cond Commissioning
107 ba75822e01 03/2011
3 Commissioning
Note
z
Normally, all screw joints of the logger housing can be opened and closed
by hand, without using any tools. If necessary, use a paper towel so you
can get a better grip on the parts.
z Insert the battery in a clean and preferably dry environment.
3.1 Inserting the battery
Note
The logger is powered by a 3.6 V lithium battery, size AA, as provided in the
scope of the delivery (see chapter 14 T
ECHNICAL DATA ). Other batteries of the
same size such as alkaline manganese batteries do not provide the required
operational voltage.
Operating time, see section 12.3 B
ATTERY .
Fig. 3-1 Inserting the battery
1
3 2