Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 56)

Logging WQL-Cond
152 ba75822e01 03/2011
Loading the
configuration
Notes
z
The program suggests a storage location and name for the file: the name
of the logger and the storing date and time (e.g. Logger WQL-
Cond_Config_20110124_1619).
z The file has the file extension, ".xml".
z The suggested location and name can be changed.
4 Confirm with the Save button.
5 A message appears, confirming that the file with the configuration
was stored.
6 Confirm with OK.
7 To load the configuration of a logging job, click Load configuration.
The Open window of the configuration appears.
8 Select the file and click Open.
9 A window with the stored configuration of the logging job appears.
Change the settings if necessary and set up the logging job as usual.