Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 58)

Logging WQL-Cond
154 ba75822e01 03/2011
8.6 Importing data
Depending on the logging job, the WQL-Cond logger measures for a certain
period of time and at certain intervals the conductivity and temperature of a
solution. The data is stored in the logger. The WQL-Log PC program has to
import and store to a database the data before the data can be displayed and
processed.
To import the data of a logging job, proceed as follows:
Note
If the logger contains data, the list with the query for the use of the data
appears automatically when the logger is connected to the PC program.
1 Connect the WQL-Cond logger to the PC with the USB cable.
2 The list of logging jobs with their respective status appears.
3 If you wish to import the data of the highlighted job, click Import.
Further information, see section 8.8 M
ANAGING THE LOGGING JOBS
.
Note
Only click Delete all logging jobs if you want to discard all data stored in the
logger. This action will delete all jobs in the logger memory, and the data will
be irretrievably lost!
The jobs that were already imported and stored in the database are
retained.