Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 48)

Logging WQL-Cond
144 ba75822e01 03/2011
8.3 Setting the parameters and starting the logging job
To change one or several of the above listed settings proceed as follows:
1 Connect the WQL-Cond logger to the PC with the USB cable.
2 Start the WQL-Log program.
The Login window appears.
3 Confirm with OK. The WQL-Log program searches for the connection
with the logger.
4 Confirm with OK.
5 If the logger contains new data:
A window with the current logging jobs appears.