Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 32)

Calibration in control standard (determining the cell constant) WQL-Cond
128 ba75822e01 03/2011
6.1 Calibration settings
Calibration
procedures
Two calibration procedures can be selected:
z
Manual (with a control standard of your choice)
z Automatic (with 0.01 mol/l KCl control standard)
Selecting the
calibration
procedure
Here you can select the Manual or Automatic calibration procedure.
1 In the Device menu, click the menu item, Calibrate.
2 The calibration window appears.
3 In the mode menu, highlight the required calibration procedure and
select it with a mouse click.
The selected setting is immediately active.