Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 72)

Working with the database and measurement data WQL-Cond
168 ba75822e01 03/2011
Querying user-
defined data
1 Click the User-defined tab in the New query window. The User-
defined tab appears immediately in the Query menu if no logger is
connected.
2 If you only want to query datasets with a certain measured value ID,
check off the box for Measured value ID and then click the arrow next
to the selection field for the Measured value ID. Select the required
measured value ID.
3 In the Sensors field, select one or two measured values to be
queried.
4 If you only want to query datasets with a certain date, check off the
box for Time period and then click the arrow next to the selection
fields for the time (from and to). Select the required date in both fields.
Next to the date fields are the time fields where you enter the time
(hours, minutes, seconds) either with the arrow keys or by entering
the number with the keyboard.
5 Click Apply to display the selected datasets.