Xylem WQL-Cond CONDUCTIVITY DATALOGGERS User Manual
Page 54
Logging
WQL-Cond
150
ba75822e01
03/2011
Starting the
logging job
22
To start the logging job, click the button, Send logging job. The
message, The settings have been successfully transferred appears.
23
Confirm with OK. A window pops up with an overview of the logging
job just sent.
24
Confirm with OK. A note appears with the message that the logger
will now be disconnected from the PC program and, depending on the
setting, the information that the logging is started immediately or that
the logging is started when the logger key button is pressed.
25
Confirm with OK.
Note
The setting routine for the logging job can be canceled at any time with the
Cancel button. In this case the logger does not start the logging job; instead,
the data window appears after a note.