Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 81)

WQL-Cond Resetting the logger
177 ba75822e01 03/2011
11 Resetting the logger
You can reset to the default condition the logger and the PC program with its
settings.
In the default condition, the settings are as follows:
Resetting to
default condition
To reset the logger and PC program to the default condition, proceed as
follows:
Configuration parameters Setting
Logging interval 1 second
Start of the logging Logger key button
End of the logging Time period
1 hour
Measured value ID default
Measuring mode Conductivity
Temperature compensation nLF
Temperature coefficient 2.000
Reference temperature 25 °C
Cell constant 0.475 cm -1
TDS factor 1.00
Date, time 01.01.2003, 00:00
Calibration records None
Notes
z
The Device / Reset function deletes the calibration records as well as all
measurement data from the logger! Before deleting the logger memory,
make sure that you have imported to the database all data you want to
keep.
z The battery counter is not reset with the Device / Reset function. It has to
be reset with the reset function of the battery manager.
1 In the Device menu, click the menu item, Reset. A security prompt
appears.
2 Confirm with OK. The settings are reset to the default condition.