Extron Electronics System 5 IP Series User Guide - Manual (Page 100)

Special Applications, cont’d
System 5 IP Switchers • Special Applications 6-6
d. Configure the function/room button to light red (or another color of your
choice) on the second (Action #2) press, and click OK.
12. Associate the DVD half of the IRCM-DV+ with input 3 for the first press of
function/room button 1.
a. Click Add below the Button Operations area at the bottom of the GC
window. The Add Button Operation window appears.
b. Select User Defined as the operation type.
c. Select Internal SIS Op (no port). This allows the commands you add in
the next step to be directed to the switcher itself.
d. In the Command area, enter this SIS command: 3*26#
Button to
associate the
VCR half
(even address,
2 or 4) with
Button to
associate the
DVD half
(odd address,
1 or 3) with
—
(0 x 16) + (3) = 3
3
e. In the Function/Timing area, click Pressed and Action #1. The Add
Button Operation window now looks like this example:
f. Click OK.
13. Associate the VCR half of the IRCM-DV+ with input 3 for the second press of
function/room button 2.
a. Click Add below the Button Operations area at the bottom of the GC
window. The Add Button Operation window appears.
b. Select User Defined as the operation type.
c. Select Internal SIS Op (no port). This allows the
commands you add in the next step to be
directed to the switcher itself.
d. In the Command area, enter this SIS
command: 48*26#
(See the calculation at right.) Button to
associate the
VCR half
(even address,
2 or 4) with
Button to
associate the
DVD half
(odd address,
1 or 3) with
3
(3 x 16) + (0) = 48
—
e. In the Function/Timing area, click Pressed and Action #2
f. Click OK.