Preliminar y – Extron Electronics System 5 IP Series User Guide User Manual
Page 53
Advertising
4-17
System 5 IP • Software- and Web Page-based Setup and Control
PRELIMINAR
Y
An example for a specific IR driver is shown in the following screen picture.
• Serial Devices — To see a page of simulated buttons you can click to control
each RS-232-configured device, click on the name of the desired port (Display
Port, Port A, Port B, Port C, or Port D). If the port is not configured or it is
configured for IR communication, no page appears when you click on the port’s
name.
The example shown below shows available commands for the configured
display device. The commands came from the driver file that was uploaded for
this specific display panel.
Advertising