Extron Electronics System 5 IP Series User Guide - Manual (Page 45)

4-9 System 5 IP • Software- and Web Page-based Setup and Control
PRELIMINAR
Y
Status
System Status
This Web page provides information on settings. Changes must be made via the
Configuration Web page or via the configuration software or SIS programming.
Personnel who have user access can view this page but do not have access to
configuration pages.
A typical System Status Web page
The power amp voltage is shown only for System 5 IP models with an
integrated power amplifier.
Statistics
The Statistics page displays information on the model of display device that is part
of the system, on how many hours the system has been used, on how many total
hours the projector lamp or display has been turned on, and on how many times
each button on the switcher’s front panel has been pressed. This page does not
appear before the switcher has been configured. Once you create a configuration
using Global Configurator software and upload the configuration to the
System 5 IP, this Statistics page becomes accessible.