Extron Electronics System 5 IP Series User Guide - Manual (Page 56)

Software- and Web Page-based Setup and Control, cont’d
System 5 IP • Software- and Web Page-based Setup and Control 4-20
PRELIMINAR
Y
Info
A GlobalViewer Info page showing a disconnected projector
A GlobalViewer Info page showing a connected projector
• The IP Link Global Viewer window at the left of the screen shows a list of
IP Link-based devices within the network that have Global Viewer Web pages
installed.
• The larger Info window on the right side of the screen displays basic information
about the switcher, its IP settings, firmware version, display/projector
connection status, display power status, and elapsed projector lamp hours.
• Projector or display power connection status is indicated by one of two icons:
connected ( ) or disconnected ( ). This status reflects information
the System 5 IP obtains by power polling the display.
• The projector Power Status column indicates whether the projector is on, off,
warming up, cooling down, or unavailable (either because the projector is
disconnected or because it does not support power polling).