Extron Electronics System 5 IP Series User Guide - Manual (Page 77)

5-21 System 5 IP • SIS ™ Programming and Control
PRELIMINAR
Y
Command/r
esponse table for SIS commands (continued)
Command
ASCII
(T
elnet)
URL Encoded (W
eb)
Response
Additional description
(host to switcher)
(host to switcher)
(switcher to host)
Set gateway IP
addr
ess
24
Esc
X1
4
CG
W
X1
4
CG
|
Ipg•
X1
4
X1
4
= IP
addr
ess (xxx.xxx.xxx.xxx). Leading
zer
os ar
e optional.
Read gateway IP
addr
ess
Esc
CG
WCG
|
X1
4
Set verbose mode on/of
f 24
Esc
X22
CV
W
X22
CV
|
Vr
b
X22
Enable or disable the verbose mode via this command. For
X22
(verbose r
esponse
mode): 0 = clear/none/of
f/disabled (default for
T
elnet connections)
1 = verbose mode on/enabled (the default for RS-232 host contr
ol)
2 = tagged r
esponses for queries
3 = verbose mode and tagged r
esponses for
queries
If you enable tagged r
esponses,
all
read commands r
eturn the constant string + data. This is much like what happens when you issue a set command
(for example, command:
Esc
CN
, r
esponse: IPN •
X1
2
).
The switcher can send out unsolicited information (such as notice of a volume or input change or a change in some other setting
). That is called a verbose (wordy) r
elationship
between the switcher and a connected device. For a dir
ect RS-232 connection, the switcher is set for verbose mode by default.
When connected via Ethernet, verbose mode is
disabled (by default) in order to r
educe the amount of communication traffic on the network. If you want to use the verbose mo
de with a switcher connected via Ethernet, this
mode must be set to “on” each time you r
econnect to the switcher
.
Read verbose mode status
Esc
CV
WCV
|
X22
Get a connection listing
Esc
CC
WCC
|
[total number of client connections]
Example:
Esc
CC
WCC
|
002
Example:
This example shows two client
connections.
Read connection’s security level
Esc
CK
WCK
|
X5
2
For
X5
2
: connection’s security level. If used
as a r
esponse, this is r
eturned as 2 digits
with a leading zer
o.
0 = anonymous 1-10 = extended security levels 1 thr
ough 10
11 = user 12 = administrator