Extron Electronics System 5 IP Series User Guide - Manual (Page 35)

3-9 System 5 IP Switchers • Front Panel Features and Basic Operation
PRELIMINAR
Y
MENU
MENU
MENU
MENU
Volume
VIDEO
CONFIG
AUDIO
ADJUST
AUDIO
SETTINGS
EXIT
MENU
MENU
Select the video type.
Input 1 and input 2 only:
RGB or video (composite
or S-video).
Selecting inputs 3, 4, or 5
displays the video type.
Set the switching delay
period for RGB signals.
0 seconds to 5 seconds
in 0.5 second increments
Select a different
input to check or
change the
video type.
NEXT
Input
1 or 2
Video 2
<RGB>Vid
Video 2
RGB<Vid>
NEXT
RGBDelay
1.0
RGBDelay
3.5
Set an input's
audio gain.
-40 dB to +30 dB
in 1 dB steps
Set the overall bass
output gain/attenuation.
-10 dB to +10 dB
in 2 dB steps
NEXT
Input 4
Input 5
Audio 2
+09dB
Audio 2
+12dB
Audio 3
-02dB
NEXT
NEXT
Bass
+10dB
Bass
+02dB
Set overall treble out-
put gain/attenuation.
-10 dB to +10 dB
in 2 dB steps
NEXT
NEXT
NEXT
Treble
-10dB
Bass
+02dB
Set overall left-
right balance.
NEXT
Balance
L––––––R
If desired, select
a different
input, set
the gain for it.
Input 3
Audio 3
+04dB
Video 4
Vid Only
Video 5
RGB Only
Select mono or
stereo for Preamp
and amplifier output.
AudioOut
M<Stero>
AudioOut
<Mono>St
Set the Preamp
output level.
+4 dBu or -10 dBV
NEXT
PreAmp
+4dBu
PreAmp
–10dBV
Balance
L––––––R
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
VOLUME
ADJUST
System 5 IP menus, submenus, and adjustment options