Burkert Type 8619 - Manual (Page 38)

36
Adjustmentandcommissioning
8.6. Description of the icons
13:40 M0:MAIN
X
MENU
mA
AO1
6.000
20.00
OFF DO2
mA
AO2
OFF DO1
OFF DI2
OFF DI1
2010/06/29
Figure 27 : Position of the icons
icon meaning and alternatives
Default icon when process monitoring is not activated via the "Diagnostics" menu; if monitoring is
activated, this icon indicates that the parameters monitored are not out of range.
If at least one monitoring is activated, the alternative icons in this position are:
• , combined with : see chap. 8.12.2 to 8.12.6
• , combined with
X
: see chap. 8.12.2 to 8.12.6
Device currently measuring.
The alternative icons in this position are:
•
H
flashing: HOLD mode activated (see chap. 8.11.1)
• T flashing: running check that an output is working and behaving correctly (see chap. 8.13.2 to
8.13.3)
"Maintenance" event; see chap. 8.11.8 and 8.11.9.
"Warning" event; see chap. 8.11.8, 8.11.9. and 8.12.2 to 8.12.6
X
Error" event; see chap. 8.11.8, 8.11.9. and 8.12.2 to 8.12.6
Memory card inserted and datalogger activated.
The alternative to this position is the icon X indicating an error. Go to the menu "Information ->
System log", to read the associated error message and go to chap. 9.3.8 to read the meaning of the
message.
Type 8619
english