Burkert Type 8619 - Manual (Page 8)

6
Intendeduse
2. inTenDeD use
use of this device that does not comply with the instructions could present risks to people, nearby
installations and the environment.
• The device is intended, depending on the modules fitted and the measurement sensors connected, for the
acquisition, processing, transmission and regulation of physical parameters such as pH, conductivity, tem-
perature or flow rate... .
• This device must be protected against electromagnetic interference, ultraviolet rays and, when installed out-
doors, the effects of climatic conditions.
• This device must be used in compliance with the characteristics and commissioning and use conditions
specified in the contractual documents and in the user manual.
• Requirements for the safe and proper operation of the device are proper transport, storage and installation, as
well as careful operation and maintenance.
• Only use the device as intended.
→
Observe any existing restraints when the device is exported.
Type 8619
english