Burkert Type 8619 - Manual (Page 46)

44
Adjustmentandcommissioning
LINE: Set the parameters for the graph displayed in a customised "Ux" view:
- PERIOD: Enter the graph refresh period in seconds.
- Y MIN: Enter the minimum value on the vertical axis for the PV selected.
- Y MAX: Enter the maximum value on the vertical axis for the PV selected.
13:40
MENU
U1:PROCESS1
100.0°C
15.00°C
32.00°C measured value of the process parameter Ymax
Ymin
2010/06/29
Figure 31 : Example of a customised view of a graph
8.10.9. renaming a process variable
To retrieve the original name of a variable, even after modification and saving:
→
move the selector into the customized name entering area.
→
delete all the characters and save.
Refer to chap. 8.9 to access Parameters menu.
Parameters Display PV:M0:MAIN
Edit name
This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
PV names
ENTERING
M0:MAIN
M1:
Mx:
... 1)
1) The choices offered depend on the modules fitted and/or the options activated. See chap. 8.10.4 and chap. 8.16.
The entered name appears in the view in Process level. See chap. 8.4.
1
13:40
3
0
1
U4:PROCESS1
6.53 pH
pHprocess1
25 mS/cm
25.2 °C
205 l/min
FlowProcess1
Default name of the process variable
Name entered for the process variable
MENU
2010/06/29
Figure 32 : Example of a renamed process variable
8.10.10. setting the display contrast and brightness
Refer to chap. 8.9 to access Parameters menu.
Parameters Display Contrast
Brightness This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
xx%
xx%
→
Set each percentage using and .
Type 8619
english