Burkert Type 8619 - Manual (Page 50)

48
Adjustmentandcommissioning
0%
100%
Lim+
Lim-
Scale- Scale+ PV
Fx: CMD1
Figure 36 : Using the "LIM-" and "LIM+" parameters on a "PROP" function
CMD SAFE: Confirm (choose "Mode: ON") or do not confirm (choose "Mode:OFF") the use of a fallback position
on the output when the "System switch" event (see chap. 8.10.17) has the state "ON". When use of the fallback
position is confirmed, enter a fallback position value of between 0 and 100% for each output.
Type 8619
english