Burkert Type 8793 - Manual (Page 16)

16
Operating states
Type 8792, 8793
Type 8792 Description of the display Type 8793
Graphical display of SP and PV
with time axis
MENU HOLD SP / PV (t)
MENU HOLD CMD / POS (t)
Graphical display of POS and
CMD with time axis
MENU HOLD CMD / POS (t)
MENU CMD/POS CLOCK
INPUT
4.0
mA
Input signal for
set-point position
(0 – 5/10 V / 0/4 – 20 mA)
MENU INPUT X.TUNE INPUT
12:00 00
Thu. 01 . 09 . 11
CLOCK
Time, weekday and date
MENU POS (t) X.TUNE INPUT
12:00
00
Thu. 01 . 09 . 11
CLOCK
MENU CLOCK CMD/POS RUN
X.TUNE
Automatic adjustment of the
positioner (position controller)
MENU CLOCK P.TUNE RUN
X.TUNE
Automatic optimization of the
process controller parameters
MENU X.TUNE P.LIN RUN
P.TUNE
Type 8792 Description of the display Type 8793
Automatic linearization of the
process characteristics
MENU P.TUNE CMD/POS RUN
P.LIN
MENU X.TUNE POS MANU
0.0 CMD
POS 0.0
Simultaneous display of the
set-point position and the
actual position of the valve
actuator (0 – 100 %)
MENU P.LIN SP/PV MANU
0.0 CMD
POS 0.0
9.3 Master code
Operation of the device can be locked via a freely selectable user
code. In addition, there is a non-changeable master code with
which you can perform all operator control actions on the device.
This 4-digit master code can be found on the last pages of these
operating instructions in the chapter “
Master code”.
If required, cut out the code and keep it separate from these oper-
ating instructions.
english