Burkert Type 8793 - Manual (Page 24)

24
External position sensor (remote)
Type 8792, 8793
12 EXTERNAL POSITION SENSOR
(REMOTE)
Depending on the connection type of the path sensor,
Type 8793 functions as a process controller or positioner
(position controller)
The following connection options are possible:
Device
type
Remote Interface Sensor Setting in the menu
(ADD.FUNCTION)
Type 8792
digital (serial)
Remote Sensor
Type 8798
–
Type 8793
POS.SENSOR
→ DIGITAL
Type 8793
analog
(4 – 20 mA) * Any, high-reso-
lution path sensor POS.SENSOR
→ ANALOG
Tab. 5: Connection options of path sensor
* If the path sensor is connected to the process controller Type
8793 via the analog interface, it can be operated only as a
positioner (position controller).
12.1 Mounting accessories
There are two options of attaching the Type 8792/8793 in remote
operation.
• Installation on a DIN rail
Holder for DIN rail mounting: Order number 675702.
• Installation on a wall
Bracket for wall mounting: Order number 675715
Installation on a DIN rail Installation on a wall
Fig. 15: Attachment types in remote operation
12.2 Connection and starting up of the
external position sensor (remote
operation)
WARNING!
Risk of injury from improper start-up!
▶ Start-up may be carried out by authorised technicians only and
with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
english