Burkert Type 8793 - Manual (Page 23)

23
Attachment and assembly
Type 8792, 8793
③
④
* The assembly bridge consists of 4 parts
which can be adjusted to the actuator by
varying the arrangement.
Fig. 13: Attach assembly bridge (schematic representation)
→
Place Type 8792/8793 with assembly bridge on the rotary
actuator and attach (see “Fig. 14”).
Fig. 14: Rotary actuator attachment
If the X.TUNE ERROR 5 message is indicated on the
graphics display after the
X.TUNE function starts, the shaft
of the Type 8792/8793 is not correctly aligned with the
shaft of the actuator.
• Check alignment (as described previously in this chapter).
• Then repeat the
X.TUNE function.
english