Burkert Type 8793 - Manual (Page 29)

29
Electrical Installation
Type 8792, 8793
14 ELECTRICAL INSTALLATION
The descriptions for the electrical connection of the PPO-
FIBUS-DP and DeviceNet designs can be found in
Chapter “15 PROFIBUS DP / DeviceNet”
14.1 Safety instructions
DANGER!
Risk of injury due to electrical shock!
▶ Before reaching into the device or the equipment, switch off the
operating voltage and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
WARNING!
Risk of injury from improper installation!
▶ Installation may be carried out by authorized technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
14.2 Designation of the circular
connectors and contacts
Functional earth FE
Operating voltage
and diverse signals
X1 - M12, 8-pole
circular connector
1 2
3
4
5
6
7
8
Binary outputs
X4 - M8, 4-pole
socket
Process actual
value
X5 - M8, 4-pole
circular connecto
r
2 4
3 1
4 2
1 3
Fig. 20: Designation of the circular connectors and contacts
english