Burkert Type 8175 - Manual (Page 73)

5
8175
ENGLISH
QUICKSTART
Select the
mounting position
Have you
a separate
version?
Have you
a cable plug
version?
Connect power
supply cable
Connect output
cable
Reassemble
housing or plug
Turn on the
power
Distance
displayed
coherent?
Program the transmitter
Yes No
See section 3.4
Unscrew the plug
screws and open
Unscrew the 4
screws and open
Install the unit
on the fitting
Check electrical
connection
See section 3 and the
page opposite
Yes
Ensure that security provi-
sions are considered with
the power cable and relay
circuit.
Pay attention to the max.
permitted load of the
output current loop.
If the unit does not work,
See section 5.2
Ensure the power supply is
switched on. See Mainte-
nance.
See the next page.
Ensure the power supply
is disconnected before
starting work.
Connect the
sensor cables
Yes
No
For panel versions move to
the next step.
No