CTI Products RCD Standard - Remote Comparator Display - Manual (Page 23)

MCN Remote Comparator Display Configuring a System
CTI Products, Inc. Using MCNCFG
68-10856-210
17
Figure 6 - Group Number Editing
6.4.3 Entering Receiver Names
Enter a descriptive name for each receiver controlled by the Comparator I/O
Modules. This will usually be a site name. The receiver name will be displayed
on the PC screen to identify the receiver. It is a 13-character alphanumeric field.
Typical entries may be "Comm Center", "North Union", "East Bend" and the like.
The Channel Name/Description is used to enter additional information about each
receiver. Entering text in this field is optional.
The Receiver Name will be used along with the Channel Name/Note and
Comparator I/O Module’s unit address in error logging printouts to identify a
particular receiver.
Note: When you are finished entering the Receiver Names or the Channel
Name/Note fields, be sure to hit
E or move your cursor to another field. This will
enter the last entry into the database. If you save the file without doing this, you
may lose your last entry.