CTI Products RCD Standard - Remote Comparator Display - Manual (Page 32)

MCN Remote Comparator Display Configuring a System
CTI Products, Inc. Using MCNCFG
68-10856-210
26
receiver number, including the MCN Group and Module number of the
Comparator I/O Module for the receiver and receiver Desc./Notes.
Tip: It is a good idea to move the cursor over each receiver on the screen and
use the Channel Description field at the bottom of the screen to verify the proper
channel assignments after you are finished building your screen.
6.5.1 Opening a new MCN Screen File
To create a new MCN Screen File, select the Files New Screen menu command.
This command will clear the screen and display the Active Group Files Dialog
Box as shown in Figure 13.
Figure 13- Configure Active Group Files Dialog Box
If you try to open a new screen and have not yet saved your work, a Save
Changes warning dialog box will be displayed.