CTI Products RCD Standard - Remote Comparator Display User Manual

Page 75

Advertising
background image

MCN Remote Comparator Display

Appendix A

CTI Products, Inc.

Changing Status Message Text

68-10856-210

69

tone time

4 digit decimal number that specifies the duration of the tone
frequency
(in seconds) tone. The range for this field is 0000
through 0100. Additional information about this field is given in
section 9.7.

This field must begin in column 18.

tone
frequency

5 digit decimal number that specifies the frequency of the tone to
sound when the input condition occurs. The range for this field is
00000 or 00037 through 32767. A value of 00000 means that no
tone is to be sounded when the input condition occurs. Additional
information about this field is given in section 9.7.

This field must begin in column 23.

audio string

1 digit decimal number that specifies the audio string to be played
when the input condition occurs. The range for this field is 0
through 9. A value of 0 means that the audio string playing is
disabled for this input condition. Additional information about this
field is given in section 9.8.

This field must begin in column 29.

output port
control

2 digit decimal number that specifies the output port control
sequence to be executed when the input condition occurs. The
range for this field is 00 through 99. A value of 00 means that the
output port control is disabled for this input condition. Additional
information about this field is given in section 9.9.

This field must begin in column 31.

text

User configurable text string to define the state. The maximum
length of the text string is 18 characters. The text must have a
double quote character (“) before the first text character and after
the last text character. The two double quotes are not displayed
and are not counted in the text string length.

If any text field of the MCNRCD.CFG file is longer than 5
characters, then the receiver names will be partially over written
when a status message is displayed. The full receiver name will be
redisplayed when the receiver returns to the idle state.

Advertising