CTI Products RCD Standard - Remote Comparator Display - Manual (Page 57)

MCN Remote Comparator Display Running the MCN Comparator Display
CTI Products, Inc. (MCNRCD) Program
68-10856-210
51
Whenever the MCNERR.LOG file is 100% full, it will automatically be
reduced to 50% of its selected size to make room available for new error log
entries. The oldest Error logs are deleted and the most recent error log entries are
saved in the reduced MCNERR.LOG file.
Warning
While the MCNRCD program is deleting the oldest Error log
data to make room for additional entries, comparator activity
is not being monitored.
Notice:
This deletion process is not reversible and may take between several seconds
to a few minutes depending upon the log file size and the computer’s speed
performance.
When the MCNRCD program is started and Error logging is enabled, the Error
Log Full message box will appear if the MCNERR.LOG file is larger than the size
selected from the command line (or the default size). The Error Log Full message
box gives the option to either continue running MCNRCD with Error logging
disabled, or to first have the Error log file reduced down to 50% of its size by
deleting the oldest entries and then continue logging. See Figure 29.
Figure 29- Error Log Full Message Box