Luminex 100 IS Version 2.1 - Manual (Page 51)

x MAP Technology Luminex xMAP Technology
PN 89-00002-00-062 Rev. A 45
Figure 29. Entering the Number of Tests
8. Select the Tests field and enter the number of desired tests and
then press Enter key. A blank entry for each test appears in the
adjacent area (each test represents an analyte bound to a unique
bead set).
9. Enter the Name, Units, and Description fields for each test. The
Apply Units button applies the same unit entered on the first line
to all other tests.
Figure 30. Defining Test Parameters
In the Tests field, enter
desired number of tests.