Luminex 100 IS Version 2.1 - Manual (Page 60)

Luminex 100 IS Developer Guide to xMAP Technology Version 2.1 x MAP Technology
54 PN 89-00002-00-062 Rev. A
Delete a Used Template
‹ To delete templates that do have batches associated to them.
If the template has batches, the Delete button for that entry is
grayed out. In this case, use the Delete Batch button on the left
side of the screen. Therefore, first check the batches, then you
can delete the template. The template ID cell is blue if batches
are associated.
Any batch results associated to this batch are deleted from IS. If
you delete a batch, you can not retrieve the data.
1. Using the Luminex 100 IS software, backup any data you wish
to recover at a later time. Then return to Developer WorkBench.
2. Click Edit Template. An Open Template dialog box appears.
Figure 41. Select Used Template To Delete
3. Select the template you want to delete (the template ID cell is
blue) and click Delete Batch.
Any batch results associated to this batch will be deleted from
IS. If you delete a batch, you can not retrieve the data.
4. At the Warning prompt, click Yes.
5. Each batch displays a warning prompt, click Yes.
6. The template ID turns white since it has no batches associated
with it. Highlight the template and click Delete.
7. Click Cancel to close the dialog box.
Note: Batches are permanently
removed and can not be
recovered if they were not
backed up.